Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Serpentine Belt on the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: V-belt

See other generations:
Video tutorial

Today's guide will show you the main steps to remove and replace the serpentine or trapezoidal belt on the Toyota Yaris. First, open the bonnet of your car and loosen the bolts on the alternator and the air conditioning compressor; to access these, you will need to raise the vehicle and remove the front right wheel and the wheel arch liner, as shown in the video.

At this point, install the new serpentine belt in the correct orientation; secure everything to maintain tension on the belt, following the video tutorial to the end!


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to Replace the Serpentine Belt on a Toyota Yaris
How to Replace the Serpentine Belt on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) The following instructions will show you the step-by-step procedure for removing and replacing the serpentine or poly V belt on a Toyota Yaris. First…
How to Replace the Serpentine Belt on the Toyota Yaris VVT-I
How to Replace the Serpentine Belt on the Toyota Yaris VVT-I
Toyota Yaris (2005-2011 / Xp90) Today's video will show you the main steps for removing and replacing the serpentine belt on the Toyota Yaris VVT-I. First, open the bonnet and start…
Replacing the Timing Belt on a Toyota Yaris
Replacing the Timing Belt on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, you will learn how to remove and replace the timing belt on a Toyota Yaris. The procedure for replacing the belt on this type…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos