Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Alternator Belt Replacement on Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: V-belt

See other generations:
Video tutorial

Open the bonnet and prop it up with the support rod. Loosen the tensioner arm of the poly V belt by unscrewing the bolt as shown in the video. Now that the belt is no longer under tension, remove it. If you do not have a diagram handy, be careful to remember the routing of the belt (I suggest taking photos).

Fit the new poly V alternator belt following the same path and tighten the tensioner arm by fully screwing the initially loosened bolt. As you can see, this is a simple operation that requires just a bit of attention or good memory.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

Replacing the Timing Belt on a Toyota Yaris
Replacing the Timing Belt on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In this video tutorial, you will learn how to remove and replace the timing belt on a Toyota Yaris. The procedure for replacing the belt on this type…
How to Replace the Serpentine Belt on the Toyota Yaris
How to Replace the Serpentine Belt on the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today's guide will show you the main steps to remove and replace the serpentine or trapezoidal belt on the Toyota Yaris. First, open the bonnet of yo…
Replacing the Alternator on Yaris
Toyota Yaris (2005-2011 / Xp90) To remove the alternator on a Yaris, start by lifting the bonnet and securing it. Locate the battery and disconnect the terminals. Move any cables an…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos