Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : Window motor

Toyota Yaris - Window motor

Toyota Yaris (1999-2005 / Xp10)
How to replace the window regulator of the Toyota Yaris.
To replace the front window regulator motor of the Toyota Yaris, we start by keeping the side window closed using a screwdriver. We remove the door panel, the …read all…
Posted on 12 July 2023 by ScegliAuto
Toyota Yaris (2005-2011 / Xp90)
Toyota Yarris window lifter installation
To install the new Toyota Yaris front door window lift mechanism, you must first remove the interior trim panel and access the mechanism; disconnect the …read all…
Posted on 26 September 2022 by ScegliAuto
Toyota Yaris (1999-2005 / Xp10)
How to replace the window regulator motor in Toyota Yaris?
In this tutorial we can see how to remove the window lifter motor in the Toyota Yaris first series, an operation to be carried out in case of failure. As for …read all…
Posted on 14 March 2024 by ScegliAuto
Toyota Yaris (2005-2011 / Xp90)
Window mechanism replacement on Toyota Yaris
Remove the Toyota Yaris window mechanism? Let's remove the door panel first. With a screwdriver we go to unscrew the fastening screws on the panel. We detach …read all…
Posted on 15 December 2023 by ScegliAuto
Toyota Yaris (1999-2005 / Xp10)
Remove window motor on Toyota Yaris
Disassembly of the damaged window motor, let's see how to do it. We disconnect the battery terminals. With a screwdriver we go to unscrew the screws in the …read all…
Posted on 2 December 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (3) Alternator (1) Shock absorbers (3) Air conditioning (5) Car stereo (34) Anti roll bar (2) Roof Rack Bars (1) Battery (29) Coil (1) Bushings (2) Arm (1) Gearbox (4) Spark plugs (18) Bodywork (3) Wheel rim (1) Key (28) Timing belt (18) V-belt (5) Air conditioning (1) Air conditioning controls (1) -board computer (27) Checks and maintenance (151) Dashboard (4) Gearshift gaiter (1) Bearing (8) Brake discs (3) Side indicator light (1) Headlight (22) Tail light (12) Fog lights (1) Air filter (19) Cabin air filter (23) Petrol filter (1) Diesel filter (5) Oil filter (4) Hand brake (2) Clutch (6) Injectors (1) Accessory Kit (6) Light bulb (9) Headlight bulb (29) Rear light bulb (15) Interior lights ceiling light bulb (9) Antifreeze liquid (8) License plate light (12) Third brake light (4) Handle (2) Muffler (2) Engine (3) Window motor (5) Starter motor (8) Gear oil (3) Engine oil (16) Door panel (25) Front bumper (9) Rear bumper (3) Brake pads (12) Hydraulic pistons (1) Tires (16) Gear Shift Knob (12) Pump (5) Fuel pump (16) Door (1) Instrument cluster (28) Radiator (2) Passenger compartment heating radiator (1) Wheel (3) Fuse box (81) Seat (15) Crankshaft RPM sensor (1) Parking sensors (2) Lock (2) Lambda sensor (1) Suspensions (2) Outside rearview mirror (13) Drums and shoes (4) Windscreen wipers (25) Thermostat (3) Transmission (1) Central tunnel (1) Windshield washer nozzle (1) Valve (1) EGR valve (2) Interior blower (2) Steering wheel (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos