Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installing the Window Regulator on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Power window motor

To install the new window regulator mechanism in the front door of the Toyota Yaris, first remove the interior trim panel to access the mechanism; disconnect the glass from the mounting points and hold it in the closed position with a clip or screwdriver; remove the motor and then complete the disassembly of the mechanism; insert the new mechanism, aligning it with the mounting points, tighten the bolts, and then lower the glass to secure it to the respective mounting points and finally connect the motor to test its operation before reassembling the panel.

Updated on 16 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Window Mechanism on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Remove the window regulator mechanism from a Toyota Yaris? First, remove the door panel. Use a screwdriver to unscrew the fixing screws on the panel.…
Removing Window Regulator Motor on Toyota Yaris
Removing Window Regulator Motor on Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Remove the battery terminals. Using a screwdriver, unscrew the screws in the internal door handle and the screws in the opening lever area. Once remo…
How to Replace the Window Regulator Motor in a Toyota Yaris?
How to Replace the Window Regulator Motor in a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In this tutorial, see how to remove the window regulator motor in the first series Toyota Yaris, an operation to perform in case of failure. For the …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos