Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Regulator on a Toyota Yaris?

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Checks and maintenance

To replace the window regulator on a Toyota Yaris, completely remove the door panel by unscrewing the screws that secure it to its housing. Once the panel is removed, locate the screws that secure the window regulator underneath. Raise and secure the glass fully, then disconnect the connectors and the 10 mm bolts that hold the mechanism, extracting it from its housing and inserting the new one before reattaching the door panel.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Installing the Window Regulator on a Toyota Yaris
Installing the Window Regulator on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To install the new window regulator mechanism in the front door of the Toyota Yaris, first remove the interior trim panel to access the mechanism; di…
Replacing Window Mechanism on Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Remove the window regulator mechanism from a Toyota Yaris? First, remove the door panel. Use a screwdriver to unscrew the fixing screws on the panel.…
How do you replace the glass of the rearview mirror of the Toyota Yaris?
How do you replace the glass of the rearview mirror of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to replace the glass of the rearview mirror of the Toyota Yaris, you need to pry with an object at the bottom of the glass: once this operat…

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer
    • Yaris 2005-2011 - Where is the 2010 Toyota Yaris jack located? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos