Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the window crank handle on a Toyota Yaris?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the window crank of the Toyota Yaris, you simply need to leverage an object like a screwdriver to detach the internal fixing clips of the crank itself: this will allow the crank to be removed from the shaft that controls the operation of the window lift, and the new crank can then be positioned on it. This should then be connected to the shaft by securing it with its internal fixing clips: after installation, you should check that the entire mechanism works correctly.


Posted on 10 January 2026 by ScegliAuto


Related tutorials

How to remove a crankshaft on a Toyota Yaris
How to remove a crankshaft on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Let's see how to remove a crank: that thing that was used to lower and raise the windows when electric window lifts did not exist (or when electric w…
How to Replace the Window Regulator on a Toyota Yaris?
How to Replace the Window Regulator on a Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) To replace the window regulator on a Toyota Yaris, completely remove the door panel by unscrewing the screws that secure it to its housing. Once the …
How to Remove the Left Door Panel on a Toyota Yaris
How to Remove the Left Door Panel on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Is the left door panel on your Toyota Yaris in need of replacement? Learn how to proceed. Disconnect the battery terminals in the engine compartment …

    Frequently Asked Questions

    • Yaris 2011-2019 - Can I replace the ignition switch on my Toyota Yaris myself? and how much is it? Read answer
    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos