Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : Replacement exterior opening handle on Toyota Yaris

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp10 - Years 1999-2005
Part: Handle
Operation: Replacement exterior opening handle on Toyota Yaris

Before you get to the handle, you have to remove the door panel. To do this, slightly unscrew the two plastic screws on the side of the same and remove the clips that they fasten, using a plastic wedge as a lever. Remove the small screw cover located near the internal handle and unscrew the screw underneath, then unscrew the one in the armrest as well (remove the drawer). Detach the plate containing the window lifter controls and disconnect the connector. Remove the panel by sliding it out a little at a time from the door. Unscrew the screws of the handle on the inside of the door and unhook the metal pin, then replace it and reassemble everything.


Posted on 14 January 2024 by ScegliAuto



How to remove the exterior handle of the Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) We replace the exterior handle mounted above the door if damaged. Let's see how to do it. In order to be able to disassemble the lock, we need to rem
How to remove the front bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Let's start by opening the front hood of our Toyota Yaris, by pulling the opening handle located at the bottom left of the steering column. After tha
How to remove the door panel of a Toyota Yaris
Toyota Yaris (2020-2024 / MK 4) Before starting, we will have to open the front door of our Toyota Yaris. Let's start by disengaging and extracting the window lifter controls, and t

Other guides that may interest you

How do I replace the Land Rover Evoque auxiliary battery?

In order to replace the auxiliary battery of the Land Rover Evoque, it is necessary to go inside the passenger compartment and remove the panel which is positioned immediately under the glovebox. Once the screws that secure this panel have been loosened, it will be possible to access the components located in its rear part, including the auxiliary battery. The latter must be disconnected from its cables and the fixing screws must be loosened. The battery can then be replaced with a new one and the panel can be fixed again with its screws.

Watch the video!


by ScegliAuto

More videos