Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : Handle

Toyota Yaris - Handle

Toyota Yaris (1999-2005 / Xp10)
Replacement exterior opening handle on Toyota Yaris
Before you get to the handle, you have to remove the door panel. To do this, slightly unscrew the two plastic screws on the side of the same and remove the …read all…
Posted on 14 January 2024 by ScegliAuto
Toyota Yaris (1999-2005 / Xp10)
How to remove the exterior handle of the Toyota Yaris
We replace the exterior handle mounted above the door if damaged. Let's see how to do it. In order to be able to disassemble the lock, we need to remove the …read all…
Posted on 4 December 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (3) Alternator (1) Shock absorbers (3) Air conditioning (5) Car stereo (34) Anti roll bar (2) Roof Rack Bars (1) Battery (29) Coil (1) Bushings (2) Arm (1) Gearbox (4) Spark plugs (18) Bodywork (3) Wheel rim (1) Key (28) Timing belt (18) V-belt (5) Air conditioning (1) Air conditioning controls (1) -board computer (27) Checks and maintenance (151) Dashboard (4) Gearshift gaiter (1) Bearing (8) Brake discs (3) Side indicator light (1) Headlight (22) Tail light (12) Fog lights (1) Air filter (19) Cabin air filter (23) Petrol filter (1) Diesel filter (5) Oil filter (4) Hand brake (2) Clutch (6) Injectors (1) Accessory Kit (6) Light bulb (9) Headlight bulb (29) Rear light bulb (15) Interior lights ceiling light bulb (9) Antifreeze liquid (8) License plate light (12) Third brake light (4) Handle (2) Muffler (2) Engine (3) Window motor (5) Starter motor (8) Gear oil (3) Engine oil (16) Door panel (25) Front bumper (9) Rear bumper (3) Brake pads (12) Hydraulic pistons (1) Tires (16) Gear Shift Knob (12) Pump (5) Fuel pump (16) Door (1) Instrument cluster (28) Radiator (2) Passenger compartment heating radiator (1) Wheel (3) Fuse box (81) Seat (15) Crankshaft RPM sensor (1) Parking sensors (2) Lock (2) Lambda sensor (1) Suspensions (2) Outside rearview mirror (13) Drums and shoes (4) Windscreen wipers (25) Thermostat (3) Transmission (1) Central tunnel (1) Windshield washer nozzle (1) Valve (1) EGR valve (2) Interior blower (2) Steering wheel (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos