Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : Dashboard

Toyota Yaris - Dashboard

Toyota Yaris (2020-2024 / MK 4)
Where is the OBD2 port located on the Toyota Yaris 2020?
If you own a 2020 Toyota Yaris and want to find out where the OBD2 port is located so that you can finally connect a diagnostic tool to it for resolving any …read all…
Posted on 27 January 2024 by ScegliAuto
Toyota Yaris (2005-2011 / Xp90)
Disassembly of the Toyota Yaris dashboard
Today's guide will show us the main instructions on how to dismantle and replace the dashboard of the Toyota Yaris. First, we get into the car and start by …read all…
Posted on 1 January 2024 by ScegliAuto
Toyota Yaris (2005-2011 / Xp90)
How to replace the dashboard of the Toyota Yaris
Start by disconnecting the cables from the battery to protect any more delicate circuits, then remove the screws that are located in the center of the heating …read all…
Posted on 3 October 2023 by ScegliAuto
Toyota Yaris (2005-2011 / Xp90)
Disassembly of the console, dashboard and radio
If we want to replace the original radio, the lighting of the buttons, or any maintenance operation, this guide shows us step by step how to disassemble the …read all…
Posted on 21 June 2023 by ScegliAuto
Cigarette Lighter (2) Airbags (3) Alternator (1) Shock absorbers (3) Air conditioning (5) Car stereo (34) Anti roll bar (2) Roof Rack Bars (1) Battery (29) Coil (1) Bushings (2) Arm (1) Gearbox (4) Spark plugs (18) Bodywork (3) Wheel rim (1) Key (28) Timing belt (18) V-belt (5) Air conditioning (1) Air conditioning controls (1) -board computer (27) Checks and maintenance (151) Dashboard (4) Gearshift gaiter (1) Bearing (8) Brake discs (3) Side indicator light (1) Headlight (22) Tail light (12) Fog lights (1) Air filter (19) Cabin air filter (23) Petrol filter (1) Diesel filter (5) Oil filter (4) Hand brake (2) Clutch (6) Injectors (1) Accessory Kit (6) Light bulb (9) Headlight bulb (29) Rear light bulb (15) Interior lights ceiling light bulb (9) Antifreeze liquid (8) License plate light (12) Third brake light (4) Handle (2) Muffler (2) Engine (3) Window motor (5) Starter motor (8) Gear oil (3) Engine oil (16) Door panel (25) Front bumper (9) Rear bumper (3) Brake pads (12) Hydraulic pistons (1) Tires (16) Gear Shift Knob (12) Pump (5) Fuel pump (16) Door (1) Instrument cluster (28) Radiator (2) Passenger compartment heating radiator (1) Wheel (3) Fuse box (81) Seat (15) Crankshaft RPM sensor (1) Parking sensors (2) Lock (2) Lambda sensor (1) Suspensions (2) Outside rearview mirror (13) Drums and shoes (4) Windscreen wipers (25) Thermostat (3) Transmission (1) Central tunnel (1) Windshield washer nozzle (1) Valve (1) EGR valve (2) Interior blower (2) Steering wheel (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos