Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dashboard of a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Dashboard

See other generations:
Video tutorial

Start by disconnecting the battery cables to protect any sensitive circuits. Then, remove the screws located at the centre of the heating control knobs.

Next, you can pull out the elliptical panel around the onboard computer display. After that, remove the screws located at the base behind the panel you just removed.

Extract the lower part by removing the panels on the vertical supports of the windscreen wiper, and you can unscrew the bolts securing the entire dashboard assembly on both sides. Now, you need to remove the last bolts located behind the glove compartment, and you're done.


Updated on 26 February 2026 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster from a Toyota Yaris
How to Remove the Instrument Cluster from a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before starting, sit in the driver's seat of your Toyota Yaris. Begin by unclipping and removing the instrument cluster trim, then disconnect the ass…
Where is the Fuse Box of a Toyota Yaris Located and How to Access It?
Where is the Fuse Box of a Toyota Yaris Located and How to Access It?
Toyota Yaris (2011-2019 / Xp130) The fuse box of your Toyota Yaris is located inside the dashboard, on the driver's side. To access it, start by opening the driver's door. Next, remo…
Removing the Instrument Cluster from a Toyota Yaris
Removing the Instrument Cluster from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) These brief and simple steps will show you how to remove and replace the instrument cluster of a Toyota Yaris. First, get inside the cabin and start …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos