Do it yourself
Frequently asked questions about cars and motorcycles

Removing the Instrument Cluster from a Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Instrument cluster

These brief and simple steps will show you how to remove and replace the instrument cluster of a Toyota Yaris. First, get inside the cabin and start by removing the plastic covers found on the side of the dashboard; then remove the instrument cluster cover, subsequently unscrewing all the fastening screws found on the side of the cluster, as shown in the video. At this point, disconnect the wiring located behind the cluster to remove it; carry out the repair or replace it with the new original one, reassembling everything!

Posted on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (1999-2005 / Xp10) Before starting, sit in the driver's seat of your Toyota Yaris. Begin by unclipping and removing the instrument cluster trim, then disconnect the ass…
Toyota Yaris (2005-2011 / Xp90) In today's video, you will see the instructions that will allow you to remove the instrument cluster from a Toyota Yaris second series. First, get in…
Toyota Yaris (2011-2019 / Xp130) In a few simple steps, you will see the procedure for removing and replacing the instrument cluster of a Toyota Yaris. First, get inside the cabin an…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos