Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard Instrument Cluster of the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Instrument cluster

See other generations:
Video tutorial

The instructions outlined in this guide will allow you to remove and replace the dashboard instrument cluster of the Toyota Yaris. First, get inside the vehicle and start by removing the plastic cover located at the base of the dashboard, prying it off from the sides; then unscrew the fixing screws located on the side of the instrument cluster, subsequently disconnecting the electrical connectors to remove it, as shown in the video.

At this point, carry out the repair or replacement of the instrument cluster, securing it correctly to the dashboard and reassembling the plastic cover!


Posted on 7 February 2026 by ScegliAuto


Related tutorials

How to Dismantle the Instrument Cluster of the Toyota Yaris
How to Dismantle the Instrument Cluster of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today's information will allow you to dismantle and replace the instrument cluster of the Toyota Yaris dashboard. First, get into the cabin and start…
Removing the Instrument Cluster from a Toyota Yaris
Removing the Instrument Cluster from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) These brief and simple steps will show you how to remove and replace the instrument cluster of a Toyota Yaris. First, get inside the cabin and start …
How to Reset the Service Light on the Toyota Yaris?
How to Reset the Service Light on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To reset the Service light on the Toyota Yaris, press and hold the button located on the side of the central display while the instrument panel is of…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos