Do it yourself
Frequently asked questions about cars and motorcycles

How to Dismantle the Instrument Cluster of the Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Instrument cluster

Today's information will allow you to dismantle and replace the instrument cluster of the Toyota Yaris dashboard. First, get into the cabin and start by removing the plastic cover of the hazard light switch by disconnecting the connector found at the back; remove the same cover on the right side, as shown in the video. At this point, unclip the cover at the base of the instrument cluster, then remove the cluster and disconnect all electrical connectors found at the back; proceed with the repair or replacement of the instrument cluster!

Posted on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Yaris (1999-2005 / Xp10) Before starting, sit in the driver's seat of your Toyota Yaris. Begin by unclipping and removing the instrument cluster trim, then disconnect the ass…
Toyota Yaris (2005-2011 / Xp90) The instructions outlined in this guide will allow you to remove and replace the dashboard instrument cluster of the Toyota Yaris. First, get inside …
Toyota Yaris (2005-2011 / Xp90) In today's video, you will see the instructions that will allow you to remove the instrument cluster from a Toyota Yaris second series. First, get in…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos