Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the instrument panel in the Toyota Yaris?

Model: Toyota Yaris Xp130 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Instrument cluster

See other generations:
Video tutorial

In this tutorial, we can see how to disassemble the instrument panel in the Toyota Yaris, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then remove the outer frame of the panel and unclip the entire plastic cover of the dashboard.

Next, locate the two screws indicated, unscrew them using a simple screwdriver with a cross tip, and, by releasing the clips on the upper side of the panel, remove it from the housing. At this point, all that remains is to disconnect the internal connector and install any replacement following the reverse procedure.


Posted on 15 January 2025 by ScegliAuto


Related tutorials

How to Remove the Instrument Cluster from a Toyota Yaris
How to Remove the Instrument Cluster from a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Before starting, sit in the driver's seat of your Toyota Yaris. Begin by unclipping and removing the instrument cluster trim, then disconnect the ass…
How to Remove the Front Bumper of a Toyota Yaris
How to Remove the Front Bumper of a Toyota Yaris
Toyota Yaris (2011-2019 / Xp130) Start by opening the bonnet of your Toyota Yaris by pulling the designated release handle located at the bottom left of the steering column. Next, un…
How to Remove the Air Vents in the Toyota Yaris?
How to Remove the Air Vents in the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this tutorial, you will see how to remove the air vents in the Toyota Yaris, a very simple and quick operation. First, go inside the cabin. Then, …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos