Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the ventilation nozzles in the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Air vents

In this tutorial we can see how to disassemble the air vents in the Toyota Yaris, an extremely simple and quick operation. First of all, let's go inside the passenger compartment, then, possibly using a plastic spatula, we unhook both panels on the sides of the central console. Subsequently, we detach the central console from the dashboard by pulling it towards us, separate it from the module containing the air vents and continue by positioning the replacement vents. To put everything back together, simply follow the reverse procedure.

Posted on 10 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Removing the Car Radio from a Toyota Yaris
Removing the Car Radio from a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) Today, you will see the steps to remove the car radio from a second-generation Toyota Yaris. First, get inside the car and remove the side trims and …
How to Remove the Air Conditioning Knobs and Stereo from a Toyota Yaris
How to Remove the Air Conditioning Knobs and Stereo from a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) How to remove the air conditioning knobs and stereo from your Toyota Yaris and don’t know how to do it? In this video, we will show you how to remove…
How to Remove the Engine Air Filter on a Toyota Yaris
How to Remove the Engine Air Filter on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Open the car's door, pull the engine bay release lever located at the bottom left of the dashboard, and lift the front bonnet. Secure it with the pro…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos