Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Air Vents from Toyota RAV 4

Model: Toyota Rav 4 MK 1, Xa10 - Years 1994-2000
Part: Air vents

In today's tutorial video, you will learn how to remove the air vents from a first-generation Toyota RAV 4, following these simple steps. The removal process does not require any special tools, just a pair of pliers and a very thin plastic lever. First, get inside the vehicle and remove the central air diffusers by prying at the sides with something sharp while gently pulling with the pliers to ease them out. If you want to refit them, simply insert them until they click into place.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Alternator on Toyota RAV 4
Removing the Alternator on Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Removing the alternator from the Toyota RAV 4. Here's how to do it. Lift the bonnet and secure it, locate the battery and disconnect the terminals. R…
Removing Rear Brake Pads on a Toyota Rav 4
Removing Rear Brake Pads on a Toyota Rav 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Remove the worn brake pads on a Toyota Rav 4. Lift the car on a jack to the desired height, then remove the wheel (using a socket wrench or air impac…
Installing an Aux Input Adapter
Installing an Aux Input Adapter
Toyota Rav 4 (2000-2006 / Xa20, MK 2) To install an auxiliary input adapter on the original radio, you need to remove the radio itself. Start by unfastening the plastic covers on the side…

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos