Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on the Toyota RAV 4 VVT-I MK4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Air filter

Discover in this brief and simple guide how to remove and replace the engine air filter on the fourth series Toyota RAV 4 with VVT-I engine. First, open the bonnet and start by unfastening and removing the cover of the air filter box, located on the right; to do this, unclip the two metal tabs on the sides, as shown in the video. At this point, remove and replace the air filter with a new one of the correct type, inserting it the right way; reattach the tabs to close the filter box!

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the throttle body on the Toyota RAV 4 VVT-I
Replacing the throttle body on the Toyota RAV 4 VVT-I
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In today's video tutorial, you will learn how to remove and replace the throttle body on the Toyota RAV 4 VVT-I, following the instructions provided …
How to Remove the Transmission from a Toyota RAV 4 2.0 VVT-I
How to Remove the Transmission from a Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Today's main instructions will illustrate how to dismantle and remove the transmission case from a Toyota RAV 4 2.0 VVT-I. First, open the vehicle's …
Change the engine oil and oil filter on the Toyota RAV 4 VVT-I
Change the engine oil and oil filter on the Toyota RAV 4 VVT-I
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Today, this guide will show you how to perform the routine maintenance service by changing the engine oil and oil filter on the Toyota RAV 4 VVT-I. F…

Other guides you may be interested in

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos