Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Transmission from a Toyota RAV 4 2.0 VVT-I

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Drivetrain

See other generations:
Video tutorial

Today's main instructions will illustrate how to dismantle and remove the transmission case from a Toyota RAV 4 2.0 VVT-I. First, open the vehicle's bonnet and start by removing the battery, disconnecting both terminals; then remove the air filter box, disconnecting the engine mount on the transmission side and removing the starter motor, as shown in the video.

At this point, lift the vehicle and remove the wishbone, also disconnecting the driveshaft; use a jack to support the transmission, then proceed with the removal.


Posted on 6 February 2026 by ScegliAuto


Related tutorials

Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I
Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Today's main steps will show you how to remove and replace the clutch on the Toyota RAV 4 2.0 VVT-I. First, open the bonnet of the vehicle and start …
How to disassemble the alternator of the Toyota RAV 4 2.0 VVT-I
How to disassemble the alternator of the Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / Xa30, MK 3) The instructions in this guide will show us how to disassemble and replace the alternator of the Toyota RAV 4 2.0 VVT-I. First, let's open the vehicl…
Replacement of the cooling radiator of the Toyota RAV 4 2.0 VVT-I
Replacement of the cooling radiator of the Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Below we will see the instructions that will allow us to disassemble and replace the cooling radiator of the Toyota RAV 4 2.0 VVT-I. First, we open t…

Other guides you may be interested in

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos