Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Clutch

See other generations:
Video tutorial

Today's main steps will show you how to remove and replace the clutch on the Toyota RAV 4 2.0 VVT-I. First, open the bonnet of the vehicle and start disconnecting the wiring located at the top of the gearbox; lift the vehicle and disconnect the clutch side driveshaft by unscrewing all the fixing bolts and disconnecting the braking system, as shown in the video.

Now remove the transmission casing and take out the old clutch, replacing the entire kit with the new one; carefully refit the new clutch and finally the entire transmission!


Updated on 7 October 2026 by ScegliAuto


Related tutorials

How to disassemble the alternator of the Toyota RAV 4 2.0 VVT-I
How to disassemble the alternator of the Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / Xa30, MK 3) The instructions in this guide will show us how to disassemble and replace the alternator of the Toyota RAV 4 2.0 VVT-I. First, let's open the vehicl…
Replacement of the cooling radiator of the Toyota RAV 4 2.0 VVT-I
Replacement of the cooling radiator of the Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Below we will see the instructions that will allow us to disassemble and replace the cooling radiator of the Toyota RAV 4 2.0 VVT-I. First, we open t…
Replacing the throttle body on the Toyota RAV 4 VVT-I
Replacing the throttle body on the Toyota RAV 4 VVT-I
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In today's video tutorial, you will learn how to remove and replace the throttle body on the Toyota RAV 4 VVT-I, following the instructions provided …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos