Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch on a Toyota RAV4?

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Clutch

See other generations:
Video tutorial

It will be possible to replace the clutch of the Toyota RAV 4 by lifting the car using a jack or a lift, so that the front right wheel and the corresponding wheel arch can be removed. Once these two parts have been taken off, it will be possible to proceed by unscrewing the bolts that secure the gearbox, allowing it to be completely removed from its housing and access the clutch located between it and the engine block itself.

Once the old clutch is accessible, it can be detached and replaced with a new one, after which the operation of the transmission can be checked.


Posted on 2 January 2026 by ScegliAuto


Related tutorials

How to Replace the Clutch in a Toyota RAV 4?
How to Replace the Clutch in a Toyota RAV 4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) The procedure for replacing the clutch in a Toyota RAV 4 involves lifting the car with a jack or ramp to remove the front right wheel and the corresp…
Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I
Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Today's main steps will show you how to remove and replace the clutch on the Toyota RAV 4 2.0 VVT-I. First, open the bonnet of the vehicle and start …
How to replace the clutch of the Toyota RAV 4
How to replace the clutch of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) This guide will show us how to disassemble and replace the clutch kit of the Toyota RAV 4. First, we open the hood and start by removing the battery …

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos