Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Gear Lever of the Toyota Rav 4?

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Transmission

See other generations:
Video tutorial

To dismantle the gear lever of the Toyota Rav 4, detach the side plastics that wrap around the centre tunnel to release the clips of the cover around the gear lever itself. Before removing this cover, unscrew the knob to take it off the lever.

This will allow you to also detach the cover around the lever and access its lower components. By doing this, all these covers can be replaced with new spare parts, disconnecting any underlying connectors as well.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Knob on a Toyota RAV 4
How to Replace the Gear Knob on a Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the gear knob on a Toyota RAV 4, lower the leather gaiter completely located under the knob: once the leather covering is lowered, you can…
How to Replace the Gear Knob of the Toyota Rav 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the gear knob of the Toyota Rav 4, detach the clips securing the leather gaiter to the knob itself. Once the gaiter is detached, lower it …
How to Replace the Automatic Gear Knob on a Toyota RAV 4?
How to Replace the Automatic Gear Knob on a Toyota RAV 4?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the automatic gear knob on a Toyota RAV 4, lower the leather gaiter from its top. This will allow you to remove the securing pin located a…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos