Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the clutch of the Toyota RAV 4?

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Clutch

The clutch that is installed on board the Toyota RAV 4 can be replaced by lifting the vehicle using a jack or a lift, so that it is possible to completely remove the front right wheel and the corresponding wheel arch. Once these two parts have been removed, it will be possible to proceed by loosening the screws that fix the gearbox, in order to be able to completely remove it from its housing and access the clutch between it and the engine block. After the old clutch is accessible, it will be possible to detach it and replace it with a new one, then verifying that everything is functioning properly.

Posted on 27 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Toyota RAV 4?
How do you replace the clutch of the Toyota RAV 4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) The procedure for replacing the clutch of the Toyota RAV 4 involves lifting the car with a jack or a lift, so that it is possible to remove the right…
How to replace the clutch of the Toyota RAV 4
How to replace the clutch of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) This guide will show us how to disassemble and replace the clutch kit of the Toyota RAV 4. First, we open the hood and start by removing the battery …
How do you replace the clutch on a Toyota RAV4?
How do you replace the clutch on a Toyota RAV4?
Toyota Rav 4 (2006-2013 / MK 3, Xa30) It will be possible to replace the clutch of the Toyota RAV 4 by lifting the car using a jack or a lift, so that the front right wheel and the corres…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos