Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Replace the Spare Wheel on a Toyota RAV 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Wheel

See other generations:
Video tutorial

Here are the step-by-step instructions to remove and replace the wheel with the spare on a Toyota RAV 4. First, remove the spare wheel secured on the tailgate; to do this, first remove the cover, then unscrew the fixing nuts to detach the wheel from the tailgate, as shown in the video.

Now take the necessary kit for the wheel replacement, lift the vehicle with the jack and unscrew the bolts; remove and replace the wheel with the spare, tightening the bolts in a criss-cross pattern.


Updated on 8 September 2026 by ScegliAuto


Related tutorials

How to Replace the Wheel with the Spare on the Toyota RAV4
How to Replace the Wheel with the Spare on the Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this guide, we will explore the steps to remove and replace the wheel with the spare on the Toyota RAV4. First, open the rear tailgate and lift th…
How to Replace the Wheel and Tyre on a Toyota RAV 4
How to Replace the Wheel and Tyre on a Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This brief and simple guide explains how to remove and replace the wheel and tyres on a Toyota RAV 4, following the instructions below. First, remove…
Guide to Replacing the Spare Wheel on the Toyota Rav 4
Guide to Replacing the Spare Wheel on the Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This video shows how to change the wheel with the spare on the Toyota Rav 4, following these simple steps. First, remove the cover of the spare wheel…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos