Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Spare Wheel on the Toyota Rav 4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Wheel

This video shows how to change the wheel with the spare on the Toyota Rav 4, following these simple steps. First, remove the cover of the spare wheel located on the boot door; then unscrew the screws to remove the wheel. Next, lift the vehicle with the jack and unscrew the bolts to remove and replace the wheel with the spare; now, tighten the bolts in a criss-cross pattern, ensuring they are secure. Finally, place everything back in the boot, reattaching the wheel cover on the rear door!

Updated on 10 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wheel with the Spare on the Toyota RAV4
How to Replace the Wheel with the Spare on the Toyota RAV4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this guide, we will explore the steps to remove and replace the wheel with the spare on the Toyota RAV4. First, open the rear tailgate and lift th…
Replacement of the rear wheel bearing of the Toyota RAV 4
Replacement of the rear wheel bearing of the Toyota RAV 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Below we will discover the steps on how to disassemble and replace the rear wheel bearing of the Toyota RAV 4. First, let's lift the vehicle and star…
Guide to Replacing the Timing Belt on the Toyota RAV 4 2.0 D
Guide to Replacing the Timing Belt on the Toyota RAV 4 2.0 D
Toyota Rav 4 (2000-2006 / Xa20, MK 2) This guide will show you how to remove and replace the timing belt on the Toyota RAV 4 2.0 D. In this case, the removal and replacement of the timing…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos