Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch of the Toyota RAV 4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Clutch

See other generations:
Video tutorial

This guide will show us how to disassemble and replace the clutch kit of the Toyota RAV 4. First, we open the hood and start by removing the battery and battery holder, then unscrewing the engine support bolts and disconnecting the clutch cable; we then lift the car and proceed with removing the wheel and front axle, accessing the gearbox, as shown in the video.

We unscrew the clutch cover bolts to remove it, then proceed with disassembling the clutch and flywheel; we replace the clutch discs with new ones, following the video tutorial until the end!


Posted on 27 April 2025 by ScegliAuto


Related tutorials

How to Replace the Clutch in a Toyota RAV 4?
How to Replace the Clutch in a Toyota RAV 4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) The procedure for replacing the clutch in a Toyota RAV 4 involves lifting the car with a jack or ramp to remove the front right wheel and the corresp…
Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I
Guide to replacing the clutch on a Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Today's main steps will show you how to remove and replace the clutch on the Toyota RAV 4 2.0 VVT-I. First, open the bonnet of the vehicle and start …
How do you replace the clutch of the Toyota RAV 4?
How do you replace the clutch of the Toyota RAV 4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) The clutch that is installed on board the Toyota RAV 4 can be replaced by lifting the vehicle using a jack or a lift, so that it is possible to compl…

Other guides you may be interested in

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos