Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the 12V Battery in a Toyota RAV4 Hybrid?

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Battery

See other generations:
Video tutorial

In this tutorial, you can see how to replace the 12V battery in a Toyota RAV4 Hybrid, a very simple and quick operation. First, ensure that the instrument panel is off for safety, then open the boot, remove the floor panel, and dismantle the right glove compartment.

Next, unscrew the negative terminal nut with a 10mm spanner, disconnect it, repeat the process for the positive terminal, and unscrew the bolt of the mounting bracket. At this point, simply extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.


Posted on 5 August 2026 by ScegliAuto


Related tutorials

Where is the 12V Battery Located in the Toyota RAV4 Hybrid?
Where is the 12V Battery Located in the Toyota RAV4 Hybrid?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) This video shows where the 12V battery is located in the Toyota RAV4 Hybrid and how to access it, for example, if you need to replace it. As shown, t…
Where is the 12v battery located in the Toyota RAV4 Hybrid?
Where is the 12v battery located in the Toyota RAV4 Hybrid?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this video, you can see where the 12v battery is located in the Toyota RAV4 Hybrid and how to proceed if you need to replace it, a task that is ex…
How to Replace the 12V Battery of the Toyota Rav4 Hybrid
How to Replace the 12V Battery of the Toyota Rav4 Hybrid
Toyota Rav 4 (2019-2026 / MK 5, Xa50) This guide shows how to dismantle and replace the 12 Volt battery of the Toyota Rav4 Hybrid, following the instructions below. First, open the rear b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos