Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the 12v battery located in the Toyota RAV4 Hybrid?

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

In this video, you can see where the 12v battery is located in the Toyota RAV4 Hybrid and how to proceed if you need to replace it, a task that is extremely simple and quick. As shown, the battery is not located in the traditional engine bay but inside the boot, specifically in the lower left area.

Before replacing it, ensure that the key is not inserted, then open the tailgate, lift the floor panel, and remove the indicated plastic cover. Finally, loosen the nuts of the mounting bracket with a 10mm spanner, disconnect both terminals, and fit the replacement.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

Where is the 12V Battery Located in the Toyota RAV4 Hybrid?
Where is the 12V Battery Located in the Toyota RAV4 Hybrid?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) This video shows where the 12V battery is located in the Toyota RAV4 Hybrid and how to access it, for example, if you need to replace it. As shown, t…
How to Replace the 12V Battery in a Toyota RAV4 Hybrid?
How to Replace the 12V Battery in a Toyota RAV4 Hybrid?
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this tutorial, you can see how to replace the 12V battery in a Toyota RAV4 Hybrid, a very simple and quick operation. First, ensure that the instr…
How to Replace the 12V Battery of the Toyota Rav4 Hybrid
How to Replace the 12V Battery of the Toyota Rav4 Hybrid
Toyota Rav 4 (2019-2026 / MK 5, Xa50) This guide shows how to dismantle and replace the 12 Volt battery of the Toyota Rav4 Hybrid, following the instructions below. First, open the rear b…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos