Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Recharge the Battery of the Toyota RAV 4 Hybrid

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Battery

This guide explains how to recharge the battery of the Toyota RAV 4 Hybrid. To perform this operation in an emergency, you will need jumper cables. Open the boot and remove the right side cover where the battery is located. Lift the battery cover and connect the negative terminal to the negative cable and the positive terminal to the positive cable. Then, using a jump starter or another vehicle, connect the positive cable to the positive terminal and the negative cable to a metal part of the vehicle. Start the car and allow the battery to recharge.

Posted on 25 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the air filter of the Toyota RAV 4 Hybrid.
Replacing the air filter of the Toyota RAV 4 Hybrid.
Toyota Rav 4 (2019-2026 / Xa50, MK 5) These short and simple steps will show us the process of disassembling and replacing the air filter of the Toyota RAV 4 Hybrid battery. First, we ope…
What is the Price of a Toyota RAV 4 Plug-In?
What is the Price of a Toyota RAV 4 Plug-In?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) What is the price of a Toyota RAV 4 Plug-In? The list price of a new Toyota RAV 4 Plug-In is £36,400. However, there are numerous promotional campaig…
How to Replace the 12V Battery of the Toyota Rav4 Hybrid
How to Replace the 12V Battery of the Toyota Rav4 Hybrid
Toyota Rav 4 (2019-2026 / Xa50, MK 5) This guide shows how to dismantle and replace the 12 Volt battery of the Toyota Rav4 Hybrid, following the instructions below. First, open the rear b…

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos