Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the cooling radiator of the Toyota RAV 4 2.0 VVT-I

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Radiator

Below we will see the instructions that will allow us to disassemble and replace the cooling radiator of the Toyota RAV 4 2.0 VVT-I. First, we open the hood of the car and start removing the plastic cover located above the bumper, removing all the plastic clips; we remove the lower engine protection and the bumper, as shown in the video. At this point, we disconnect the radiator pipes and remove the upper steel bar, thus being able to extract the radiator and the cooling fan; we apply the reverse process for reassembly!

Posted on 11 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the throttle body on the Toyota RAV 4 VVT-I
Replacing the throttle body on the Toyota RAV 4 VVT-I
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In today's video tutorial, you will learn how to remove and replace the throttle body on the Toyota RAV 4 VVT-I, following the instructions provided …
How to Remove the Transmission from a Toyota RAV 4 2.0 VVT-I
How to Remove the Transmission from a Toyota RAV 4 2.0 VVT-I
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Today's main instructions will illustrate how to dismantle and remove the transmission case from a Toyota RAV 4 2.0 VVT-I. First, open the vehicle's …
How to Replace the Air Filter on the Toyota RAV 4 VVT-I MK4
How to Replace the Air Filter on the Toyota RAV 4 VVT-I MK4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Discover in this brief and simple guide how to remove and replace the engine air filter on the fourth series Toyota RAV 4 with VVT-I engine. First, o…

Other guides you may be interested in

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos