Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the cooling radiator of the Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Radiator

See other generations:
Video tutorial

Today we will see the main instructions that will allow us to disassemble and replace the cooling radiator of the Toyota RAV 4. First, we open the hood of the car and start disassembling and removing the front bumper; to do this, we unscrew all the fixing screws we find on the top and bottom of it, also removing the plastic partition, and unscrewing the screws located on both sides of the wheel arches.

At this point, we disconnect the coolant hose and unscrew the bracket screws, then disassemble the radiator and the fan (disconnecting the electrical connector); replace the radiator with the new one!


Posted on 24 August 2025 by ScegliAuto


Related tutorials

Toyota Rav 4 (2006-2013 / MK 3, Xa30) Below, we will see the instructions that will allow you to remove and replace the cooling radiator on a Toyota RAV 4 2.0 VVT-I. First, open the bonne…
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In today's tutorial video, you will see the main instructions to remove and replace the radiator on a Toyota Rav 4. First, lift the vehicle and remov…
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Here are the steps to replace the engine coolant in the Toyota RAV 4. First, lift the vehicle and start by removing the plastic panel under the engin…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Hyundai Kona?

To completely turn off the tyre pressure warning light on the Hyundai Kona, inflate the tyres until they reach the recommended pressure value, which is indicated on the sticker affixed to the driver’s door pillar. At this point, turn on the instrument cluster by inserting the ignition key into the ignition switch. Then, navigate through the menu using the arrow buttons on the right spoke of the steering wheel. When the tyre option appears, press and hold the confirmation button to turn off the warning light.

Watch the video!


by ScegliAuto

More videos