Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Radiator on a Toyota Rav 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Radiator

See other generations:
Video tutorial

In today's tutorial video, you will see the main instructions to remove and replace the radiator on a Toyota Rav 4. First, lift the vehicle and remove the lower plastic engine cover by unscrewing the screws; then disconnect the coolant hose, allowing it to drain into a container.

At this point, unscrew the bolts of the radiator to detach it; then remove the cooling fan by disconnecting the electrical connector and unscrewing the bolts.

Replace the radiator, following the video to the end!


Updated on 12 May 2026 by ScegliAuto


Related tutorials

Toyota Rav 4 (2006-2013 / Xa30, MK 3) Below we will see the instructions that will allow us to disassemble and replace the cooling radiator of the Toyota RAV 4 2.0 VVT-I. First, we open t…
Toyota Rav 4 (1994-2000 / Xa10, MK 1) In this video tutorial, follow the main instructions to remove and replace the cabin heater radiator of the first series Toyota Rav 4. First, open th…
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Today we will see the main instructions that will allow us to disassemble and replace the cooling radiator of the Toyota RAV 4. First, we open the ho…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos