Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Cabin Heater Radiator from the Toyota Rav 4 MK1

Model: Toyota Rav 4 MK 1, Xa10 - Years 1994-2000
Part: Heater core

In this video tutorial, follow the main instructions to remove and replace the cabin heater radiator of the first series Toyota Rav 4. First, open the bonnet and disconnect the positive and negative terminals. Then, get inside the car and start removing all the upper and lower plastics of the dashboard, as shown in the video. Next, remove the airbag and the steering wheel, taking out all the central instrumentation. Once the entire dashboard is removed, you can access the radiator. Disconnect the pipe to replace it with the new one.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Air Vents from Toyota RAV 4
Removing Air Vents from Toyota RAV 4
Toyota Rav 4 (1994-2000 / MK 1, Xa10) In today's tutorial video, you will learn how to remove the air vents from a first-generation Toyota RAV 4, following these simple steps. The removal…
Removing the Alternator on Toyota RAV 4
Removing the Alternator on Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Removing the alternator from the Toyota RAV 4. Here's how to do it. Lift the bonnet and secure it, locate the battery and disconnect the terminals. R…
How to Replace the Timing Belt and Water Pump on the Toyota RAV 4
How to Replace the Timing Belt and Water Pump on the Toyota RAV 4
Toyota Rav 4 (1994-2000 / MK 1, Xa10) Today, we will go through the instructions for removing and replacing the timing belt on the Toyota RAV 4. First, lift the vehicle and start by remov…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos