Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How to replace the dashboard Toyota Rav 4

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa30, MK 3 - Years 2006-2013
Part: Dashboard
Operation: How to replace the dashboard Toyota Rav 4

As a first operation, pull the edge of the protruding part of the dashboard towards you, it will release from the teeth and disassemble in this way, now you will have access to the screws that fix the dashboard display, in fact by unscrewing them you can first pull the internal contour in plastic, and subsequently also the whole display, so once you have extracted and made the whole display come out of its seat, all you have to do is disconnect the plugs on the back to be able to remove it and reassemble the new display, retrace the steps described backwards for reassembly.


Posted on 28 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2019-2026 - What does the immediate oil maintenance warning light mean on the Toyota Rav 4? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos