Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment of a Toyota Rav 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Cabin air filter

See other generations:
Video tutorial

How to remove the glove compartment of a Toyota Rav 4? Open the glove compartment and unclip the end arms of the compartment, then use a screwdriver to unscrew the securing screws (if available in the model shown in the video). After performing the previous steps, unclip the side plastic catches of the glove compartment and extract it from the dashboard; disconnect any power cables for the lighting, and pull the glove compartment away from the dashboard.

Reassemble all components of the glove compartment as you disassembled them earlier.


Updated on 12 March 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Box and Cabin Filter of the Toyota RAV 4
How to Remove the Glove Box and Cabin Filter of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The following instructions will show you the steps to remove and replace the glove box and cabin filter of the Toyota RAV 4. First, get inside the ve…
How to Remove the Glove Compartment and Cabin Filter of the Toyota RAV 4
How to Remove the Glove Compartment and Cabin Filter of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Today, we will go through the instructions that will allow you to remove and replace the glove compartment and cabin air filter of the Toyota RAV 4. …
How to Open the Glove Compartment of the Toyota RAV 4
How to Open the Glove Compartment of the Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Follow these steps to open and close the main and auxiliary glove compartments of the Toyota RAV 4. First, get into the vehicle and pull the glove co…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos