Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment and Cabin Filter of the Toyota RAV 4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Glove compartment

See other generations:
Video tutorial

Today, we will go through the instructions that will allow you to remove and replace the glove compartment and cabin air filter of the Toyota RAV 4. First, get into the vehicle on the passenger side and start by opening the glove compartment; then detach the side rods found on the sides of the glove compartment to remove it, as illustrated in the video.

At this point, remove the small cover of the pollen filter to take out and replace the filter, inserting the new one in the correct orientation; all that’s left is to refit the glove compartment!


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to Remove the Glove Box and Replace the Cabin Filter on the Toyota RAV4
How to Remove the Glove Box and Replace the Cabin Filter on the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this guide, you will find instructions that will allow you to remove and replace the glove box, subsequently replacing the cabin filter, on the To…
How to Remove the Glove Box and Cabin Filter of the Toyota RAV 4
How to Remove the Glove Box and Cabin Filter of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) The following instructions will show you the steps to remove and replace the glove box and cabin filter of the Toyota RAV 4. First, get inside the ve…
How to Remove the Cabin Filter from a Toyota Rav 4
How to Remove the Cabin Filter from a Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) In this video, see how to remove the cabin filter from a Toyota Rav 4. Open the glove compartment and unclip the plastic guides (located at the sides…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos