Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : Glove box

Toyota Rav 4 - Glove box

Toyota Rav 4 (2013-2018 / Xa40, MK 4)
How to remove the glove box compartment on Toyota RAV4
To remove the glove box from a Toyota RAV4 SUV, you can follow these general steps. Open the glove box drawer completely. Look for the clips or pins that hold …read all…
Posted on 3 May 2024 by ScegliAuto
Toyota Rav 4 (2006-2013 / Xa30, MK 3)
How to replace the glove box damper of the Toyota RAV4.
Today's guide will show us the main steps that will allow us to disassemble and replace the glove box damper of the Toyota RAV 4. First, we get into the cabin …read all…
Posted on 17 October 2023 by ScegliAuto
Toyota Rav 4 (2019-2024 / Xa50, MK 5)
How to disassemble the glove compartment and the pollen filter of the Toyota RAV 4.
Today we will see the instructions that will allow us to disassemble and replace the glove compartment and the cabin air filter of the Toyota RAV 4. First of …read all…
Posted on 17 October 2023 by ScegliAuto
Toyota Rav 4 (2006-2013 / Xa30, MK 3)
How to open the storage compartment drawer of the Toyota RAV4.
Below we will see the steps that will allow us to open and close the main and auxiliary glove compartments of the Toyota RAV 4. First, we get into the car and …read all…
Posted on 15 October 2023 by ScegliAuto
Toyota Rav 4 (2000-2006 / Xa20, MK 2)
How do you remove the glove box of the 2003 Toyota Rav 4?
The glove compartment of the 2003 Toyota Rav 4 is very easy to remove and only requires the use of a Phillips screwdriver. The first thing to do is open the …read all…
Posted on 17 July 2023 by ScegliAuto
Toyota Rav 4 (2013-2018 / Xa40, MK 4)
How to remove the glove box drawer in Toyota RAV4?
In the event that the glove compartment drawer of the Toyota RAV4 fails, or we need to remove it to access the dashboard from the lower area, we can follow …read all…
Posted on 13 March 2024 by ScegliAuto
Airbags (2) Alternator (4) Loudspeaker (1) Shock absorbers (1) Car stereo (10) Anti roll bar (2) Roof Rack Bars (2) Battery (27) Air Vents (1) Arm (1) Gearbox (3) Spark plugs (6) Glow plugs (1) Bodywork (1) Glove box (6) Key (25) Timing belt (16) V-belt (1) Air conditioning (1) Air conditioning controls (1) -board computer (22) Checks and maintenance (113) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Spacers (1) Rear bench seat (2) Headlight (13) Tail light (11) Fog lights (5) Air filter (15) Cabin air filter (19) Petrol filter (2) Diesel filter (5) Oil filter (4) Clutch (1) Injectors (1) Window lift switch (1) Accessory Kit (7) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (15) Rear light bulb (7) Interior lights ceiling light bulb (7) Antifreeze liquid (3) Dashboard light (2) License plate light (3) Third brake light (1) Handle (3) Engine (2) Window motor (1) Starter motor (6) Gear oil (3) Engine oil (15) Door panel (16) Front bumper (4) Rear bumper (6) Brake pads (9) Tires (7) Gear Shift Knob (8) Fuel pump (14) Door (3) Instrument cluster (22) Radiator (1) Passenger compartment heating radiator (1) Wheel (5) Fuse box (27) Seat (8) Lock (3) Lambda sensor (1) Suspensions (2) Outside rearview mirror (7) Windscreen wipers (13) Transmission (3) Windshield washer nozzle (1) Valve (2) EGR valve (4) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos