Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Toyota
  4. :
  5. Rav 4
  6. : Passenger compartment heating radiator

Toyota Rav 4 - Passenger compartment heating radiator

Toyota Rav 4 (1994-2000 / MK 1, Xa10)
Removal of the interior radiator of the Toyota Rav 4 MK1

In this video tutorial we will see the main instructions to remove and replace the internal radiator of the passenger compartment heating of the Toyota Rav 4 …read all…
Posted on 15 July 2022 by ScegliAuto

Airbags (2) Alternator (4) Loudspeaker (1) Shock absorbers (1) Car stereo (10) Anti roll bar (2) Roof Rack Bars (2) Battery (27) Air Vents (1) Arm (1) Gearbox (3) Spark plugs (6) Glow plugs (1) Bodywork (1) Glove box (6) Key (25) Timing belt (16) V-belt (1) Air conditioning (1) Air conditioning controls (1) -board computer (22) Checks and maintenance (113) Throttle body (1) Dashboard (1) Bearing (2) Brake discs (2) Spacers (1) Rear bench seat (2) Headlight (13) Tail light (11) Fog lights (5) Air filter (15) Cabin air filter (19) Petrol filter (2) Diesel filter (5) Oil filter (4) Clutch (1) Injectors (1) Window lift switch (1) Accessory Kit (7) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (15) Rear light bulb (7) Interior lights ceiling light bulb (7) Antifreeze liquid (3) Dashboard light (2) License plate light (3) Third brake light (1) Handle (3) Engine (2) Window motor (1) Starter motor (6) Gear oil (3) Engine oil (15) Door panel (16) Front bumper (4) Rear bumper (6) Brake pads (9) Tires (7) Gear Shift Knob (8) Fuel pump (14) Door (3) Instrument cluster (22) Radiator (1) Passenger compartment heating radiator (1) Wheel (5) Fuse box (27) Seat (8) Lock (3) Lambda sensor (1) Suspensions (2) Outside rearview mirror (7) Windscreen wipers (13) Transmission (3) Windshield washer nozzle (1) Valve (2) EGR valve (4) Interior blower (5) Steering wheel (5)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos