Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : Antifreeze coolant

Toyota Rav 4 - Antifreeze coolant

Antifreeze Coolant Toyota Rav 4 (2013-2018 / mk 4, xa 40)

Toyota Rav 4 (2013-2018 / MK 4, Xa40)
How to Replace the Antifreeze in a Toyota RAV 4
Below are the step-by-step instructions for replacing the coolant or antifreeze in a Toyota RAV 4. First, slightly lift the vehicle and remove the plastic …Read all…
Posted on 25 August 2026 by ScegliAuto
Toyota Rav 4 (2006-2013 / MK 3, Xa30)
Replacing the Coolant in the Toyota RAV 4
Here are the steps to replace the engine coolant in the Toyota RAV 4. First, lift the vehicle and start by removing the plastic panel under the engine by …Read all…
Posted on 6 August 2026 by ScegliAuto
Toyota Rav 4 (2006-2013 / MK 3, Xa30)
Replacement of Antifreeze
If you notice that the coolant in the reservoir has turned brown, rust may have formed within the system, and it will be necessary to replace the fluid and …Read all…
Posted on 27 February 2026 by ScegliAuto

Antifreeze Coolant Toyota Rav 4 (2006-2013 / mk 3, xa 30)

Toyota Rav 4 (2013-2018 / MK 4, Xa40)
How to Replace the Antifreeze in a Toyota RAV 4
Below are the step-by-step instructions for replacing the coolant or antifreeze in a Toyota RAV 4. First, slightly lift the vehicle and remove the plastic …Read all…
Posted on 25 August 2026 by ScegliAuto
Toyota Rav 4 (2006-2013 / MK 3, Xa30)
Replacing the Coolant in the Toyota RAV 4
Here are the steps to replace the engine coolant in the Toyota RAV 4. First, lift the vehicle and start by removing the plastic panel under the engine by …Read all…
Posted on 6 August 2026 by ScegliAuto
Toyota Rav 4 (2006-2013 / MK 3, Xa30)
Replacement of Antifreeze
If you notice that the coolant in the reservoir has turned brown, rust may have formed within the system, and it will be necessary to replace the fluid and …Read all…
Posted on 27 February 2026 by ScegliAuto
Airbag (4) Alternator (6) Speaker (1) Shocks (1) Antenna (2) Car stereo (9) Anti-roll bar (3) Roof rack bars (2) Battery (28) Ignition coil (1) Air vents (1) Control arm (1) Transmission (3) Spark plugs (7) Glow plugs (2) Body (8) Glove compartment (8) Key (52) Trunk lock (1) Timing belt (25) V-belt (4) Air conditioner (1) Onboard computer (15) Checks and maintenance (86) Throttle body (1) Dashboard (2) Bearing (3) Brake rotors (2) Wheel spacers (1) Rear bench seat (4) Headlight (15) Tail light (15) Fog lights (6) Air filter (20) Cabin air filter (20) Fuel filter (2) Diesel fuel filter (10) Oil filter (6) Clutch (9) Fuel injectors (3) Window switch (1) Accessory kit (7) Light bulb (8) Side marker bulb (2) Headlight bulb (22) Tail light bulb (11) Interior dome light bulb (10) Antifreeze coolant (3) Instrument panel light (2) License plate light (4) (1) Handle (3) Engine (3) Power window motor (2) Starter motor (7) Transmission fluid (4) Engine oil (14) Clock (35) Door trim panel (18) Front bumper (7) Rear bumper (8) Brake pads (9) Tires (2) Shift knob (8) Pump (1) Fuel pump (16) Car door (2) Instrument cluster (8) Radiator (3) Heater core (1) Wheel (6) Fuse box (48) Seat (13) Parking sensors (3) Door lock (3) Oxygen sensor (1) Suspension system (2) Side mirror (12) Rearview mirror (2) Warning light – error code (39) (58) Tire pressure warning light (34) Service warning light (156) Fuel cap (7) Windshield wipers (15) Drivetrain (4) Windshield washer nozzle (1) Valve (2) EGR valve (5) Blower motor (5) Steering wheel (5)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos