Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Antifreeze in a Toyota RAV 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Antifreeze coolant

Below are the step-by-step instructions for replacing the coolant or antifreeze in a Toyota RAV 4. First, slightly lift the vehicle and remove the plastic protection cover located under the engine by unscrewing the fixing screws; then disconnect the radiator hose, located next to the fan, allowing the fluid to drain into a container for about ten minutes, as shown in the video. At this point, reconnect the hose and unscrew the cap of the reservoir; then top up with the new fluid suitable for your radiator!

Updated on 25 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Coolant in the Toyota RAV 4
Replacing the Coolant in the Toyota RAV 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Here are the steps to replace the engine coolant in the Toyota RAV 4. First, lift the vehicle and start by removing the plastic panel under the engin…
Remove the Timing Belt on a Toyota Rav 4
Remove the Timing Belt on a Toyota Rav 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) Learn how to replace the timing belt on a Toyota Rav 4. Open the bonnet and lift it, securing it in place. Use a socket spanner to remove the coolant…
How to Replace the Clutch on a Toyota RAV4
How to Replace the Clutch on a Toyota RAV4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) To replace the clutch on a Toyota RAV4, lift the vehicle with a jack so that the front wheels are off the ground: this will allow you to loosen the b…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos