Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Coolant in the Toyota RAV 4

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Antifreeze coolant

See other generations:
Video tutorial

Here are the steps to replace the engine coolant in the Toyota RAV 4. First, lift the vehicle and start by removing the plastic panel under the engine by unscrewing all its screws. Then disconnect the coolant hose, allowing the fluid to drain into a container.

Next, open the bonnet and unscrew the cap of the expansion tank. Top up with the new fluid suitable for your radiator, filling to the maximum level mark!


Updated on 6 August 2026 by ScegliAuto


Related tutorials

Toyota Rav 4 (2013-2018 / Xa40, MK 4) Below are the step-by-step instructions for replacing the coolant or antifreeze in a Toyota RAV 4. First, slightly lift the vehicle and remove the pl…
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Here are the instructions for removing and replacing the xenon front headlamp bulb on your Toyota RAV4. First, open the bonnet and remove the bulb pr…
Toyota Rav 4 (2000-2006 / MK 2, Xa20) Removing the fuel pump from a Toyota Rav 4? Disconnect the battery cables, then remove the rear seats of the car. Use a socket wrench to unscrew the …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos