Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the fuel pump of the Toyota Rav 4

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Fuel pump

Disassembling the fuel pump of a Toyota Rav 4? We disconnect the battery cables, then, we remove the rear seats of the car. Unscrew the tightening screws of the metal cap with a socket wrench, remove it from its seat, use absorbent paper around the perimeter to plug liquid leaks. We unscrew the large lock nut of the fuel pump, disconnect the power supply terminals and the liquid circulation pipes. We extract the floating fuel pump from its seat with attached pieces. Finally we reassemble the new fuel pump.


Posted on 23 November 2023 by ScegliAuto



Guide to disassembling the fuel pump of the Toyota RAV 4.
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Through these simple instructions, we will see how to disassemble and replace the fuel pump of the Toyota RAV 4. To access the fuel pump, it will be
Guide to disassembling the fuel tank and fuel pump of the Toyota RAV 4.
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Let's briefly see in this guide the instructions that will allow us to disassemble and replace the fuel tank and fuel pump of the Toyota RAV 4. First
How to disassemble and replace the Toyota RAV 4 fuel pump
Toyota Rav 4 (2019-2024 / Xa50, MK 5) In today's video tutorial we will see how to disassemble and replace the fuel pump of the Toyota RAV 4 tank, following the instructions below. First

Other guides that may interest you

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos