Do it yourself
Frequently asked questions about cars and motorcycles

Guide to Removing the Fuel Pump from the Toyota RAV 4

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Fuel pump

These simple instructions will show you how to remove and replace the fuel pump on the Toyota RAV 4. To access the fuel pump, you will need to remove the fuel tank; raise the vehicle and begin unscrewing the tank bolts and disconnecting the fuel lines, as shown in the video. Once the tank is removed from the chassis, you can access and remove the fuel pump or float, which provides the signal indicating the fuel level. Replace it if necessary, applying the reverse procedure for reassembly!

Updated on 15 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2006-2013 / MK 3, Xa30) This guide briefly outlines the instructions for removing and replacing the fuel tank and fuel pump on a Toyota RAV 4. First, lift the vehicle and st…
Toyota Rav 4 (2006-2013 / MK 3, Xa30) This guide provides the necessary instructions to remove and replace the fuel pump of the Toyota RAV4. To access the fuel pump, it will be necessary …
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Removing the fuel pump from a Toyota Rav 4? Disconnect the battery cables, then remove the rear seats of the car. Use a socket wrench to unscrew the …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos