Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Fuel Pump of the Toyota RAV4

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Fuel pump

This guide provides the necessary instructions to remove and replace the fuel pump of the Toyota RAV4. To access the fuel pump, it will be necessary to lower the fuel tank by raising the vehicle and unscrewing the fastening screws of the tank brackets; once the tank is lowered, disconnect the fuel supply line and the electrical connector of the fuel level sensor, as shown in the video. Now unscrew the pump collar to remove it and replace it with the new one, remounting the tank onto the vehicle's chassis!

Updated on 9 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Toyota Rav 4 (2000-2006 / Xa20, MK 2) Removing the fuel pump from a Toyota Rav 4? Disconnect the battery cables, then remove the rear seats of the car. Use a socket wrench to unscrew the …
Toyota Rav 4 (2013-2018 / MK 4, Xa40) These simple instructions will show you how to remove and replace the fuel pump on the Toyota RAV 4. To access the fuel pump, you will need to remove…
Toyota Rav 4 (2019-2026 / Xa50, MK 5) In today's tutorial, you will learn how to remove and replace the fuel pump from the tank of a Toyota RAV 4, following the instructions below. First,…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos