Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front and rear seats of the Toyota RAV4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Seat

See other generations:
Video tutorial

The following steps will show us how to disassemble and remove the front and rear seats of the Toyota RAV 4. First, we open the front doors and start unscrewing all the fixing screws we find on the front seat guides; then we disconnect the electrical connector located underneath to remove it, as shown in the video.

At this point, we remove the rear seats of the car, first disassembling the bench and then removing the backrests (unscrewing the screws located near the belt attachments); we clean or replace the seats!


Posted on 6 November 2025 by ScegliAuto


Related tutorials

Guide to dismantling the rear seats of the Toyota RAV4
Guide to dismantling the rear seats of the Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Today we will see the instructions that will allow us to disassemble and replace the rear seats of the Toyota RAV 4, in simple and quick steps. First…
How to Remove the Rear Seats from a Toyota Rav 4?
How to Remove the Rear Seats from a Toyota Rav 4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To remove the rear seats from the Toyota Rav 4, recline the backs of the seats so they can be pushed forward to access their rear screws. Once these …
How to Remove the Rear Seats from a Toyota Rav 4
How to Remove the Rear Seats from a Toyota Rav 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Remove the seat from inside the cabin (unscrew the bolts located above the plates); the metal guides at both ends of the backrest mounted on the car'…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos