Do it yourself
| ||||
|
Toyota Rav 4 - Video tutorial
Model: Toyota Rav 4
MK 4, Xa40
- Years 2013-2018 Let's briefly see the instructions that will allow us to disassemble and replace the xenon headlight bulb of the Toyota RAV 4. First of all, we open the hood of our car and start by removing the bulb's protective cover; then we disconnect the electrical connector and release the metal clip by pressing it, to remove the bulb along with the control unit, as shown in the video. At this point, we proceed to install the new low beam bulb, which has the same attachment, following the video tutorial until the end for reassembly!
Posted on 23 September 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsReplace the steering angle sensor on the Volkswagen Golf 5When the steering angle sensor malfunction warning light comes on, it may need to be replaced as follows: first remove the steering wheel and the lower steering wheel guard by removing the three fixing screws. The steering sensor is located just below the steering column. To release it you need to have a small screwdriver and insert it into the hole on the front, push the screwdriver all the way down until the clips at the bottom are released. Next, pull down on the back of the card containing the sensor and disengage it from the steering column. At that point take the new card and reposition it, after which proceed backwards to reassemble the various components. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.060
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |