Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on the Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

If you want to replace the front headlamp bulb on your Toyota RAV4 fourth series (2013-2018) yourself, carefully follow the instructions in this new guide. Before starting, remember to keep the car switched off for the entire duration of the operation.

Go outside, fully lift the front bonnet, and remove the protective cover inside the engine compartment. Then disconnect the electrical pin and proceed to replace the existing bulb with the new one. Finally, reassemble everything correctly and you're done.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To correctly replace the headlight bulb of your second generation Toyota RAV4, you need to follow the steps described in this new mini guide. First o…
How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Below we will see the information that will allow us to disassemble and replace the headlight bulb of the Toyota RAV4. First, we open the hood of the…
How to Remove the Front Headlight on Toyota RAV4
How to Remove the Front Headlight on Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Learn how to remove the front headlight on a Toyota RAV4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secur…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos