Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the headlight bulb of the Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

Below we will see the information that will allow us to disassemble and replace the headlight bulb of the Toyota RAV4. First, we open the hood of the car and start removing the plastic protective cap of the bulbs; then we disconnect the electrical connector of the bulb holder, remove it, and thus disconnect the low beam bulb, as shown in the video.

At this point, we replace and install the new headlight bulb, of the correct type and with the same fitting; we connect it and then verify its operation.


Posted on 2 February 2025 by ScegliAuto


Related tutorials

How to replace the headlight bulb of the Toyota RAV4
How to replace the headlight bulb of the Toyota RAV4
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To correctly replace the headlight bulb of your second generation Toyota RAV4, you need to follow the steps described in this new mini guide. First o…
How to Remove the Front Headlight on Toyota RAV4
How to Remove the Front Headlight on Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Learn how to remove the front headlight on a Toyota RAV4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secur…
How to Replace the Front Headlamp Bulb on the Toyota RAV4
How to Replace the Front Headlamp Bulb on the Toyota RAV4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) If you want to replace the front headlamp bulb on your Toyota RAV4 fourth series (2013-2018) yourself, carefully follow the instructions in this new …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos