Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs in a Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the front headlight bulbs in a Toyota RAV4, a very simple and quick operation. First, ensure that the key is not inserted for safety, then open the bonnet, locate the connector at the back of the headlight in question, and disconnect it. Next, remove the large circular cap by unscrewing it, disconnect the internal connector, and extract the old bulb by turning it slightly counterclockwise.

At this point, simply insert the replacement, preferably an LED, and reassemble everything by following the reverse procedure.


Posted on 12 August 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs of a Toyota Rav4
How to Replace the Front Headlight Bulbs of a Toyota Rav4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) Want to change the front headlight bulbs of a Toyota Rav4 and don't know how? Follow these steps. Open the bonnet and secure it. Locate the inspectio…
Replacing the Rear Light of the Toyota RAV4
Replacing the Rear Light of the Toyota RAV4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Below are the main instructions for removing and replacing the front light and its bulbs of the Toyota RAV4. First, open the rear tailgate and start …
How to Replace the Fog Light Bulbs on a Toyota RAV4?
How to Replace the Fog Light Bulbs on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / Xa40, MK 4) In this tutorial, you will learn how to replace the fog light bulbs on a Toyota RAV4, a very simple and quick operation. First, ensure that the key i…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos