Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light of the Toyota RAV4

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2026
Part: Tail light

Below are the main instructions for removing and replacing the front light and its bulbs of the Toyota RAV4. First, open the rear tailgate and start unscrewing the fixing screws located on the sides of the light; then disconnect the electrical connector of the bulbs to remove it, as illustrated in the video. At this point, replace the bulbs or the entire light, installing it correctly and connecting the bulbs; once fitted, check the proper functioning of the indicator and stop lights!

Updated on 13 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Rear Light on a Toyota RAV4?
How to Remove the Rear Light on a Toyota RAV4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) As shown in this tutorial, removing the rear light on a Toyota RAV4 to replace a faulty bulb is a very simple and quick task. First, ensure the key i…
Replacing Rear Brake Light Bulb on Toyota Rav4
Replacing Rear Brake Light Bulb on Toyota Rav4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this video tutorial, you will see instructions on how to remove and replace the rear brake light bulb on a third-generation Toyota Rav4. First, op…
How to Remove the Rear Lights on a Toyota RAV4?
How to Remove the Rear Lights on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) In this tutorial, see how to remove the rear lights on a Toyota RAV4, a very simple and quick operation if you need to replace a bulb or the entire u…

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos