Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlamp Bulb on a Toyota Rav4?

Model: Toyota Rav 4 MK 4, Xa40 - Years 2013-2018
Part: Tail light bulb

To replace the rear headlamp bulb on a Toyota Rav4, open the tailgate of the boot so that the screws on either side of the lamp can be loosened. This will allow you to remove the lamp from its housing and disconnect the connector at the back. Now, open the lamp and remove the bulb inside, replacing it with a new spare part. After the replacement, close the lamp, reconnect it to the connector, and secure it back into its housing with the appropriate screws.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Toyota RAV4?
How to Replace the Front Headlamp Bulb on a Toyota RAV4?
Toyota Rav 4 (2013-2018 / MK 4, Xa40) To replace the front headlamp bulb on a Toyota RAV4, open the bonnet to access the rear of the corresponding headlamp. Here, you will find the connec…
Replacing Rear Headlight Bulbs on Toyota Rav 4
Replacing Rear Headlight Bulbs on Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Lift the boot lid and remove the two bolts securing the affected rear light to the bodywork. This will allow you to extract the headlamp from its hou…
Replacing the Front Headlamp Bulb of a Toyota Rav 4
Replacing the Front Headlamp Bulb of a Toyota Rav 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Today, we will see in this video tutorial how to remove and replace the front headlamp bulb of a Toyota Rav 4 in simple and quick steps. First, open …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos